FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 986 Parts

Category: PTO / Driveline

[Categories] [All 986 Parts] [All Farmall Models]

Anti Creep Brake Piston - This Anti Creep Piston is used in multiple International models. Three are used per tractor. Sold individually. (Item #: 113402, Ref: 381464R22) $19.70

Drive Shaft - For independent PTO equipped tractors. 28 teeth. For tractor models HYDRO 100, 756, 766, 786, 826, 856, 886, 966, 986, 1066, 1086, 1466, 1468, 3088, 3288, 3688 (Item #: 108882, Ref: 528676R1) $88.00

Gear, IPTO Driven - This Gear is used on some: 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986 (Item #: 118606, Ref: 381506R1) $266.00

Gear, IPTO Driven - Used on: 1066 Below serial number 22999 with 68143C93 Clutch Housing. 1086, 1466 Below Serial number 14999, with 68143C93 Clutch Housing, 1468 Below serial number 8999 with 68143C93 Clutch Housing, 3088, 3288, 3388, 3688, 6388, (766 Gas Below serial number 10934, Diesel Below serial number 8999 with 68143C93 Clutch Housing), 786, 886, 966 Below serial number 1700 with 68143C93 Clutch Housing, 986. (Item #: 109564, Ref: 68512C1) $400.00

Gear, PTO Idler - This PTO Idler Gear is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. (Item #: 115441, Ref: 381509R1) $157.00

IPTO Drive Shaft, Used - For International tractor models Hydro 100, 706, 766 (s/n 7661-earlier), 786, 826, 856, 886, 966 (s/n 14863-earlier), 986, 1066 (s/n 18508-earlier), 1086, 1206, 1456, 1466 (s/n 12776-earlier), 1468 (s/n 7649-earlier), 1486, 2706, 2826, 2856, 3088, 3288, 3388, 3688, 6388, 21206, 21456, Replaces International OEM number 65357C1, 380103R21, Splines: 6 and 12, Bolt hole on each end: 3/8", For a new version of this item use Item #: 173492, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434305) $107.01

Independant PTO Bearing Cage - For tractor models (Hydro 100, 706, 756, 766, 786, 806, 826, 856, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 21206, 21256, 21456 all with torque amplifier). (Item #: 123110, Ref: 380101R2) $123.00

Independent PTO Idler Gear Bearing - This Needle Bearing is used on IPTO systems on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, MX80C, MX90C, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 7210, 7230, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces K620047, F9706, C10300, 287057R91, 128876A1, 12-1676, 531437R91, 285057R91, T15025 (Item #: 116993, Ref: 833083M1) $23.26

Independent PTO Idler Shaft - This Independent Idler Shaft is used on 21026, 2706, 2756, 2806, 2826, 2856, HYDRO 100, HYDRO 186, 1026, 1066, 1086, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 706, 7110, 7120, 756, 766, 786, 806, 826, 856, 886, 966, 986. Replaces 381507R1 (Item #: 118605, Ref: 381507R1) $37.20

No
Picture
Independent PTO Shaft - Clutch Housing, Used - For International tractor models Hydro 100 (gas s/n 10934-earlier, diesel s/n 8999-earlier), 756 (Farmall s/n 17636-later, International s/n 8425-later), 766 (gas s/n 10934-earlier, diesel s/n 8999-earlier), 786, 826, 856 (Farmall s/n 27287-later, International s/n 9493-later), 886, 966 (s/n 1700-earlier), 986, 1066 (s/n 22999-earlier), 1086, 1456, 1466 (s/n 14999-earlier), 1468 (s/n 8999-earlier), 2756 (Farmall s/n 17636-later, International s/n 8425-later), 2826, 2856 (Farmall s/n 27287-later, International s/n 9493-later), 3088, 3288, 3688, 21456, Replaces International OEM number 528676R1, Teeth: 28, Splines: 17, Shaft Diameter: 1.75", Degree: 25, Check degree of angle on gear before ordering, For a new version of this item use Item #: 108882, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434187) $53.01

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

No
Picture
PTO Assembly - Dual Speed, Remanufactured, 381512R91 - For International / Farmall tractor models Hydro 100, Hydro 186 (s/n 11999-earlier), 706, 756, 806, 826, 856, 886 (s/n 16999-earlier), 966, 986 (s/n 23999-earlier), 1066, 1086 (s/n 47999-earlier), 1206, 1256, 1456, 1466, 1486 (s/n 25999-earleir), 3388 (s/n 10384-earlier), Replaces International OEM number 381512R91, Uses 12 spline input coupler, (Item #: 203593) $1675.01

PTO Assembly - Dual Speed, Remanufactured, 69065C93 - For International / Farmall tractor models Hydro 186 (s/n 12000-later), 786, 886 (s/n 17000-later), 986 (s/n 24000-later), 1086 (s/n 48000-later), 1486 (s/n 26000-later), 1566, 1586, 3088, 3288, 3388 (s/n 10385-later), 3488, 3588, 3688, 3788, Replaces International OEM number 69065C93, Uses 15 spline input coupler, (Item #: 203594) $2225.01

PTO Brake Piston - This PTO Brake Piston is for Case International models 1086, 1486, 1566, 1568, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 786, 886, 986, Hydro 186. (Item #: 121142, Ref: 1289335C4) $32.10

PTO Clutch Disc and Gasket Kit - This kit consists of 1 - 68803C91 Disc Kit (7 - 381490R1 And 9 - 381489R3) and 1 - 77720C94 Gasket Set. (Item #: 117090, Ref: PCK720) $106.00

PTO Control Boot - For tractor models 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786, Hydro 70, Hydro 86, Hydro 100. (Item #: 118607, Ref: 393071R2) $5.90

PTO Coupler, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, Super M, Super MTA, 300, 300U, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486 (s/n 25999-earlier), 2504, 2544, 2606, 2656, 3388 (s/n 10384-earlier), Replaces International OEM nos 360168R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430248) $49.51

PTO Cover - Used with 1264503C1 PTO shield to replace 536212R2. For tractor models 1026, 1066, 1086, 2856, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 766, 856, 886, 966, 986, Hydro 100, Hydro 186. (Item #: 185389, Ref: 1264520C1) $34.70

PTO Drive Gear, Used - For International tractor models Hydro 100, 766 (Gas To SN 10934), 786, 886, 986, 1066 (to SN 22999), 1086, 1466 (to SN 14999), 1468 (to SN 8999), 3088, 3288, 3388, 3588, 3688, 6388, 6588, Replaces International OEM number 68512C1, Note 766, 1066, 1466, 1468 must have clutch housing number 68143C93, 58 Teeth, For a new version of this item use Item #: 109564, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 409564) $239.01

PTO Drive Shaft - 51 and 12 teeth. For tractor models 1026, 1066, (1086 serial number up to 47999), 1206, 1256, 1456, (1486 serial number up to 25999), 21026, 21206, 21256, 21456, 2544, 2656, 2706, 2756, 2826, 2856, (3388 serial number up to 10384), 544, 656, 664, 666, 686, 706, 756, 766, 826, 856, (886 serial number up to 16999), 966, (986 serial number up to 23999), Hydro 100, (Hydro 186 serial number up to 11999), Hydro 70, Hydro 86. (Item #: 166964, Ref: 389529R1) $563.00

PTO Drive Shaft Bearing Cage - For tractor models 1066, 1086, 1206, 1256, 1456, 1466, 1486, 21206, 21256, 21456, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4100, 4156, 4166, 4186, 706, 756, 766, 786, 806, 826, 856, 966, 986, Hydro 100. (Item #: 172679, Ref: 384079R2) $202.00

PTO Drive Shaft Bearing Cage, Used - For International tractor models Hydro 100, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1066, 1206, 1256, 1456, 1466, 1468, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3688, 4156, 4166, 4186, 21206, 21256, 21456, Replaces International OEM number 384079R2, For a new version of this item use Item #: 172679, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436642) $109.01

PTO Driven Gear Bearing - This needle bearing measures 1.25 inches inside diameter x 1.63 inches outside diameter x 1.25 inches wide. It replaces OEM numbers 576539R91, JD9900 (Item #: 116970, Ref: 576539R1) $48.80

No
Picture
PTO Driven Shaft Bearing Retainer, Used - For International tractor models Hydro 100, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4166 (s/n 11100-later), 4186 (s/n 11100-later), 6388, 6588, 6788, Replaces International OEM nos 67757C1, Use with Gear 68511C1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434845) $20.01

PTO Extension Shaft, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 806, 826, 856, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1486 (s/n 25999-earlier), 3388 (s/n 10384-earlier), Replaces International OEM nos 381513R11, Splines: 12 and 12, Length: 19", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497169) $50.01

PTO Housing Cover - This PTO housing cover is used on Dual Speed PTO Tractors. It is used with 120985C1 1000 RPM Shafts and 393111R2 540 RPM PTO Shafts. Seal and gasket kit is available as part number 77720C94 or 77721C91 (also includes brake components. Replaces 64785C91 (Item #: 109390, Ref: 64785C92) $544.00

PTO Input Shaft, Used - For International tractor models Hydro 70, Hydro 86, Hydro 100, Hydro 186, 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3388, 21026, 21206, 21256, 21456, Replaces International OEM nos 389529R1, Spline: 12 and 51, Uses #91 Woodruff Key 1/4" X 3/4", ****Check Your Keyway Size Before Ordering****, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497525) $291.01

PTO Plate - Measures 4.070 inches inside diameter, 5.300 inches outside diameter. Replaces 381489R3, 1277392C1, 1997688C1 (Item #: 111358, Ref: 381489R3) $4.30

PTO Seal and Gasket Set - This PTO Seal and Gasket Set Contains 2- 359158R1 O-rings, 3 - 574069R1 O-rings, 3 - 356005R1 O-rings, 3 - 22458R1 O-rings, 1 - 352219R1 O-ring, 2 - 381480R91 Oil Seals, 1 - 381481R1 Gasket, 1 - 364145R1 O-ring, 1 - 381485R1 Clutch Cup Ring, 1 - 702283R1 O-ring, 1 - 381488R1 O-ring, 1 � 124545 Woodruff Key, 1 - 529565R1 Gasket, 1 - 355967R1 O-ring, 1 - 364885R1 O-ring, 1 - 68097C1 Stem Seal, 1 - 297459R1 O-ring, 1 - 392382R1 O-ring, 1 - 381526R1 Suction Tube Seal, 1 - 381467R1 PRO Housing Gasket. Replaces 77720C94, 77720C92, 77720C93 (Item #: 108554, Ref: 77720C94) $55.00

PTO Seal and Gasket Set with Brake Plungers - Contains 2- 359158R1 O-rings, 3 - 574069R1 O-rings, 3 - 356005R1 O-rings, 3 - 22458R1 O-rings, 1 - 352219R1 O-ring, 2 - 381480R91 Oil Seals, 1 - 381481R1 Gasket, 1 - 364145R1 O-ring, 1 - 381485R1 Clutch Cup Ring, 1 - 702283R1 O-ring, 1 - 381488R1 O-ring, 1 � 124545 Woodruff Key, 1 - 529565R1 Gasket, 1 - 355967R1 O-ring, 1 - 364885R1 O-ring, 1 - 68097C1 Stem Seal, 1 - 297459R1 O-ring, 1 - 392382R1 O-ring, 1 - 381526R1 Suction Tube Seal, 1 - 381467R1 PRO Housing Gasket, 3 - 381464R22 Anti Creep Brake Pistons, 1 - 393071R2 Dust Boot. Replaces 77720C94, 77720C92, 77721C91 (Item #: 125359, Ref: 77721C91) $82.00

PTO Shaft - This PTO Shaft is used on Industrial: 2756, 2856. Tractors 1066 below serial number 18508, 1086, 1466 below serial number 12776, 1468 below serial number 7649, 1486, 3088, 3288, 3388, 3688, 6388, 756, 766 below serial number 7661, 786, 856, 966 below serial number 14863, 986. Replaces 380103R21, 65357C1 (Item #: 173492, Ref: 65357C1) $273.00

PTO Shaft - 1000 RPM - 17 drive splines 13.187 inches long. For the following tractors with DUAL SPEED PTO Assembly: 100, 186, 706, 756, 766, 786, 806, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1486, 1566, 3088, 3288, 3688, 6388. (Item #: 107273, Ref: 120985C1) $230.00

PTO Shaft Bearing - This Bearing is used with 405182R1-R, 528676R1, 104401C1 PTO shafts. 55mm ID x 100mm OD x 21mm W. HYDRO 100, 1066, 1086, 1466, 1468, 1486, 1586, 3388, 3588, 3788, 4166, 4186, 6388, 6588, 6788, 766, 786, 886, 966, 986. Replaces 70227C91, N1211 (Item #: 155911, Ref: 70227C91) $72.00

PTO Shaft Oil Seal - This seal fits the following tractor models as a PTO shaft oil seal: 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186, Hydro 70, and Hydro 86. Replaces part numbers: 213712, 381480R1, 381480R91, 534917R91, 634036, and 80634036. It has an inside diameter of 1.375 inches, an outside diameter of 2.000 inches, and is 0.337 inches wide. (Item #: 109957, Ref: 8N7052A) $8.80

PTO Shaft, 540 RPM - 13 tooth front splines, 10.815 inch long. For tractor models (706, 806, 826, Hydro 100, Hydro 186, 1026 all from 1962 with single speed PTO), (756, 766, 786, 856, 886, 966, 986, 1066, 1086 all from 1962 with single or dual speed PTO), 1206, 1468, 2706, 2806, 2826, 21206, 21026, (1256, 1456, 1466, 1486, 2756, 2856, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 6388, 6588, 6788, 21256, 21456 all with dual speed PTO). Replaces 393111R2, 393111R1 (Item #: 107272, Ref: 393111R2) $98.00

PTO Shaft, Used - For International tractor models Hydro 100, Hydro 186, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2706, 2756, 2806, 2826, 2856, 3088, 3288, 3388, 3688, 6388, 21026, 21206, 21256, 21456, Replaces International OEM number 393111R1, 393111R2, 10.815" Long, Dual Speed PTO, For a new version of this item use Item #: 107272, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 407272) $57.01

PTO Shield - Used with 1264520C1 PTO cover to replace 536212R2. For tractor models 1026, 1066, 1086, 2856, 3088, 3288, 3388, 3488, 3688, 5088, 5288, 5488, 6388, 766, 856, 886, 966, 986, Hydro 100, Hydro 186. (Item #: 164324, Ref: 1264503C1) $54.00

PTO Shield - Two Piece For 06 Series thru 86 Series with Dual Speed PTO. OEM# 1264520C1 1264503C1 (Item #: 103968, Ref: R0907) $57.00

PTO Shield, Used - For International tractor models Hydro 100, Hydro 186, 766, 856, 886, 966, 986, 1026, 1066, 1086, 2856, 21206, Replaces International OEM nos 536212R2, 536212R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498088) $89.01

Universal Parts and Accessories
Category: PTO / Driveline

Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124837, Ref: AB4111WY138) $122.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

Overrun Coupler with Quick Release - This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. Rated up to 70 horsepower. (Item #: 182532, Ref: S.23639) $55.00

PTO Adapter - I.D. 1.125 inch 6 spline Female to O.D. 1.375 inch 6 spline Male, ExtendsL 1.125 inches, Length: 3 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103190, Ref: PA01) $10.88

PTO Adapter - Inside diameter 1.375 inch 21 spline female to outside diameter 1.375 inch 6 spline male. Extends: 4.125 inch, length: 6.375 inch. Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103188, Ref: PA08) $31.90

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends: 4.125 inches, Length: 6.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103187, Ref: PA09) $68.00

PTO Adapter - Extends and increases: 1 1/8" female 6 spline to 1 3/8" male 6 spline. 4-5/8" length. Extends PTO 2-3/4" . Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". Also Replaces T353F. (Item #: 103191, Ref: PA04) $21.50

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.125 inch 6 spline male, Extends: 2.750 inches, Length: 5.375 inches Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103192, Ref: PA05) $20.00

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 6 spline male, Extends PTO Shaft 4.00 inches, Length: 5.75 inches, Max HP: 70. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 121311, Ref: PA06) $23.70

PTO Adapter - I.D. 1.375 inch 6 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.125 inches, Length: 5.875 inches, Max HP: 70 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 152729, Ref: PA11) $39.00

PTO Adapter - I.D. 1.750" 20 spline female to O.D. 1.375" 6 spline inch male, Extends: 4.625", Length: 7.50", Max HP: 100. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: PA12) $64.58

PTO Adapter - I.D. 1.750 inch 20 spline female to O.D. 1.375 inch 21 spline male, Extends: 4.625 inches, Length: 7.00 inches, Max HP: 100 Picture is generic. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103195, Ref: PA14) $104.95

PTO Driveline - Weasler Driveline 14006127ST is designed for fertilizer spreader and general applications., Designed for fertilizer spreader general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 1, Compressed (Closed) Length: 27", Extended Length: 30", Compressed Overall Length: 34.08", Extended Overall Length: 37.08", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 15 HP at 540 RPMS and 23 HP at 1000 RPMS, (Item #: 131232) $118.00

PTO Driveline - Weasler Driveline 14006340ST is designed for fertilizer spreader and general applications., Designed for finishing mower general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 3, Compressed (Closed) Length: 31.89", Compressed Overall Length: 39.93", Extended Length: 48.94", Extended Overall Length: 56.98", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, Rated for 29 HP at 540 RPMS and 44 HP at 1000 RPMS, (Item #: 131234) $141.00

PTO Driveline - Weasler Driveline 14006430ST is designed for for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series 4, Compressed (Closed) Length: 22.05", Compressed Overall Length: 30.00", Extended Length: 30.28", Extended Overall Length: 40.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, Rated for 36 HP at 540 RPMS and 56 HP at 1000 RPMS, (Item #: 131238) $166.00

PTO Driveline - Weasler Driveline 14006432ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 24.02", Compressed Overall Length: 31.97", Extended Length: 35.55", Extended Overall Length: 43.50", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131239) $157.00

PTO Driveline - Weasler Driveline 14006437ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 37.00", Compressed Overall Length: 46.39", Extended Length: 43.67", Extended Overall Length: 53.06", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131241) $176.00

PTO Driveline - Weasler Driveline 14006442ST is designed designed for rotary cutter general applications�, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 33.86", Compressed Overall Length: 41.81", Extended Length: 53.88", Extended Overall Length: 63.27", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round�, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131242) $178.00

PTO Driveline - Weasler Driveline 14006448ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Equivalent to Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 39.76", Compressed Overall Length: 48.18", Extended Length: 61.81", Extended Overall Length: 70.23", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131243) $173.00

PTO Driveline - Weasler Driveline 14006453ST is designed designed for post hole auger general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 4, Compressed (Closed) Length: 45.67", Compressed Overall Length: 53.62", Extended Length: 71.65", Extended Overall Length: 79.60", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-1/4" Round, HP@540RPM: 36, HP@1000RPM: 56, (Item #: 131245) $178.00

PTO Driveline - Weasler Driveline 14006542ST is designed designed for rotary cutter general applications, Designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 33.86", Compressed Overall Length: 42.44", Extended Length: 51.26", Extended Overall Length: 59.84", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8" Round, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131246) $204.00

PTO Driveline - Weasler Driveline 14006546ST is designed designed for rotary cutter general applications, Design adjustability (cut-to-length) capabilities, Tri-lobe shaft profiles, Standard guard construction without Easy Lock allows assembly or removal with a screwdriver, Bondioli- Pavesi PTO Series: 5, Compressed (Closed) Length: 37.80", Compressed Overall Length: 46.70", Extended Length: 57.83", Extended Overall Length: 63.73", Tractor: 1-3/8"-6 Spline Quick Disconnect, Implement: 1-3/8"-6 Spline Quick Disconnect, HP@540RPM: 52, HP@1000RPM: 81, (Item #: 131248) $209.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103167, Ref: C690F) $76.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 191020, Ref: C680F) $76.00

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 3/8 inch male, 6-Spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103168, Ref: C660F) $64.78

PTO Overide Clutch - Override coupler for converting 1 1/8 inch female to 1 3/8 inch male, (has 1 1/8 inch female at one end and 1 3/8 inch male at the other end) 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Item #: 103169, Ref: C670F) $46.60

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 5/8 inch round bore with keyway. (Item #: 183772, Ref: B6691) $51.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 3/4 inch round bore with 1/4 inch keyway. (Item #: 183766, Ref: B2711) $53.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183768, Ref: B2712) $48.80

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 6 spline (standard 540 RPM PTO) to 1 inch round bore with keyway. (Item #: 183770, Ref: B2713) $40.60

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 3/4 inch round bore with keyway. (Item #: 183763, Ref: B2902) $53.00

PTO to Pump Coupling - Note: U.S. Safety Standard precludes the use of P.T.O. adapters that could extend the tractor P.T.O. shaft with the possibility of the universal joint protruding BEYOND THE TRACTOR SAFETY SHIELD. This adapter goes from 1-3/8 inch 21 spline (standard 1000 RPM PTO) to 7/8 inch round bore with keyway. (Item #: 183764, Ref: B2903) $49.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: PTO / Driveline

[Categories] [All 986 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy